| = | ||||||||||
| Code 1011-X | ||||||||||
| EP Semi-Synthetic Coolant | ||||||||||
| <= /td> | ||||||||||
| C= ode 1011-X has the most of the advantages of a synthetic coolant, and also the benef= its of containing | ||||||||||
| s= mall amounts of petroleum oil. The small amount of petroleum oil provides lubricity for the slideways and | ||||||||||
| l= eaves a very slight protective oil film on the finished part. | ||||||||||
| <= /td> | ||||||||||
| C= ode 1011 - X contains an EP (extreme pressure) additive and is recommended for moder= ate to heavy | ||||||||||
| d= uty machining and grinding of both ferrous and nonferrous metals. In addition, Code 1011-X is fortified | ||||||||||
| w= ith corrsion inhibitors, apowerful, but safe biocide package and antifoam. The recommendation starting | ||||||||||
| d= ilutions are for machining 20:1 and for grinding 40:1. The reduced amount of petro= leum oil in this product | ||||||||||
| m= akes disposal less of a problem when compared to soluble oils. | ||||||||||
| <= /td> | ||||||||||
| Refractometer Readings | 9.2 | 4.6 | 2.3 | 1.5 | 1.2 | |||||
| Corresponding Dilutions | 1:05 | 1:10 | 1:20 | 1:30 | 1:40 | |||||
| = | ||||||||||
| Property | Typical Value | |||||||||
| <= /td> | ||||||||||
| Appearance, 70°F | Clear, dark blue liquid | |||||||||
| = | ||||||||||
| Mineral Oil Content, Wt% | 18 | |||||||||
| = | ||||||||||
| S= pecific Gravity, 20°C/20°C | 1.006 | |||||||||
| = | ||||||||||
| Density (lbs/gal) 20°C | 8.38 | |||||||||
| = | ||||||||||
| Emulsion pH (1:20) | 8.3 - 8.5 | |||||||||
| = | ||||||||||
| <= /td> |